Canon FAX-L250 User Manual Download Page 116

Page: 116 / 282

Setting the Scanning Contrast

Contrast is the difference in brightness between the lightest and darkest parts of a printed document.

You can adjust the contrast the FAX-L250 uses when scanning documents to be sent. STANDARD is

the default setting and is adequate for most documents. To darken a light original, set to DARKER; to

lighten dark originals, use LIGHTER.

Press FUNCTION.

Use

to select USER SETTINGS.

Press START/COPY, then use

to select

SCAN CONTRAST.

Press START/COPY.

The currently set scanning contrast is displayed.

Press

to select the scanning contrast

you wish to set.

You can select STANDARD, LIGHTER, or

DARKER

You can cancel and return to standby mode by

pressing the

( STOP) button any time

before pressing the

( START/-COPY) button

in step 6.

Press START/COPY to save your selection,
then press STOP to return to standby mode.

FUNCTION

USER SETTINGS

SCAN CONTRAST

STANDARD

14:30

FaxOnly

Sending Faxes

5-14

Summary of Contents for FAX-L250



























































































































































































































































































Search results

Summary of Contents for FAX-L250

Reviews:

Related manuals for FAX-L250

Brands by name

Popular brands

Canon FAX-L250, User Manual

Search results

Summary of Contents for FAX-L250

Reviews:

Related manuals for FAX-L250

Brands by name

Popular brands