Canon FAX-L250 User Manual Download Page 24

Page: 24 / 282

Do not insert objects of any kind into the slots or openings on the FAX-L250’s cabinet, as they could

touch dangerous voltage points or short out parts, and result in fire or electric shock.

Do not allow small objects (such as pins, paper clips, or staples) to fall into the FAX-L250. If

something does fall into it, unplug the unit immediately and call your local authorised Canon dealer

or service centre.

Do not plug the power cord into an uninterruptible power supply (UPS).

Always unplug the FAX-L250 before moving or cleaning it.

Whenever you unplug the FAX-L250, wait at least five seconds before you plug it back in.

Keep the FAX-L250 away from direct sunlight, as this can damage it. If you have to place it near a

window, install heavy curtains or blinds.

Do not expose the FAX-L250 to extreme temperature fluctuations. Install the unit in a place with

temperatures between 10° and 32.5°C.

Always unplug the FAX-L250 during thunderstorms.

Before you transport the FAX-L250, remove the toner cartridge.

Always lift the FAX-L250 as shown below. Never lift it by its sheet feeder or other supports.

Introducing the FAX-L250

1-10

Summary of Contents for FAX-L250



























































































































































































































































































Search results

Summary of Contents for FAX-L250

Reviews:

Related manuals for FAX-L250

Brands by name

Popular brands

Canon FAX-L250, User Manual

Search results

Summary of Contents for FAX-L250

Reviews:

Related manuals for FAX-L250

Brands by name

Popular brands