Canon FAX-L250 User Manual Download Page 2

Page: 2 / 282

Although this equipment can use either loop disconnect or DTMF signalling, only the performance

of the DTMF signalling is subject to regulatory requirements for correct operation. It is therefore

strongly recommended that the equipment is set to use DTMF signalling for access to public or

private emergency services. DTMF signalling also provides faster call set up.

This CE Marking shows compliance of this equipment with Directive 73/23/EEC and Directive

89/336/EEC (as amended by Directive 92/31/EEC), both as amended by Directive 93/68/EEC.

Canon Inc. /Canon Europa N.V.

Copyright

transmitted, transcribed, stored in a retrieval system, or translated into any language or computer

language in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise, without the prior written permission of Canon, Inc.

Summary of Contents for FAX-L250



























































































































































































































































































Search results

Summary of Contents for FAX-L250

Reviews:

Related manuals for FAX-L250

Brands by name

Popular brands

Canon FAX-L250, User Manual

Search results

Summary of Contents for FAX-L250

Reviews:

Related manuals for FAX-L250

Brands by name

Popular brands