Canon FAX B210c User Manual Download Page 33

Page: 33 / 214

Chapter 2

Setting Up

2-19

Setting Up

Loading Paper in the Multi-Purpose Tray

Follow this procedure to load paper in the multi-purpose tray:

Make sure the paper thickness lever is set to

(left).

• For details,

→

p. 5-6.

Do not set the paper thickness lever

while the unit is printing since this will
cause problems.

Ink

Cartridge
BCl-21

Color

Made in

Japan

Ink

Cartridge
BCl-21

Black

Made in

Japan

Raise the paper rest until it stops

, then

move the paper guide to the left to match the
size of your paper

Prepare a stack of paper by fanning the edge
that will feed into the unit first, and then by
tapping the stack on a flat surface to even its
edges.

Insert the stack into the multi-purpose tray

and align the right edge of the stack with the
right side of the multi-purpose tray. Slide the
paper guide snugly against the left edge of
the stack

• The multi-purpose tray holds up to 100 sheets of

75 g/m

plain paper.

• Make sure the stack does not exceed the paper

limit mark (

The unit is now ready to print.

Paper Limit Mark

Summary of Contents for FAX B210c























































































































































































































Search results

Summary of Contents for FAX B210c

Reviews:

Related manuals for FAX B210c

Brands by name

Popular brands

Canon FAX B210c, User Manual

Search results

Summary of Contents for FAX B210c

Reviews:

Related manuals for FAX B210c

Brands by name

Popular brands