Canon FAX B210c User Manual Download Page 149

Page: 149 / 214

Chapter 12

Maintenance

12-9

Maintenance

• To help ensure the maximum life of your BJ cartridges, always follow the guidelines for cartridge

maintenance. (

→

p. 2-13)

• For optimum printing results and to avoid printing problems, Canon recommends that you only

use the Canon BJ cartridges and tanks described in this guide.

• For BJ cartridge yields,

→

p. A-5.

Print the nozzle check pattern.
(

→

p. 12-10)

Perform print head cleaning.
(

→

p. 12-11)

• You can clean the print head up

to five consecutive times if
necessary.

There is no problem with the BJ
cartridge or tanks.
Try adjusting the print settings.
(

→

Software User’s Guide

)

Print the nozzle check pattern
again. (

→

p. 12-10)

You should now be able to print
properly.

Replace the BJ cartridge or
tank(s). (

→

pp. 12-12, 12-15)

Satisfactory

Unsatisfactory

Summary of Contents for FAX B210c























































































































































































































Search results

Summary of Contents for FAX B210c

Reviews:

Related manuals for FAX B210c

Brands by name

Popular brands

Canon FAX B210c, User Manual

Search results

Summary of Contents for FAX B210c

Reviews:

Related manuals for FAX B210c

Brands by name

Popular brands