Canon FAX B210c User Manual Download

Page: 161 / 214

Chapter 13

Troubleshooting

13-3

leshooting

Clearing Jams

Jams in the ADF

When a document jams or misfeeds in the ADF, the LCD displays

CHECK DOCUMENT

Follow this procedure to clear the document jam:

You do not need to unplug the unit when clearing document jams.

Press Stop.

Open the operation panel partially by gently
pulling it towards you.

• It only opens slightly.
• Do not try to pull the document out without

opening the operation panel since you may tear or
smudge the document.

While holding the operation panel open,
remove the document.

• Pull it gently in either direction.
• If a multipage document is loaded, remove the

entire document from the ADF.

If the paper does not pull out easily, do not
force it. Contact your local authorised Canon
dealer or the Canon help line.

When you are finished, close the operation
panel by pressing it down from the centre.

• Be sure to close the operation panel until it locks

into place, or the unit will not function properly.

Press Resume and start the operation again.

Summary of Contents for FAX B210c























































































































































































































Search results

Summary of Contents for FAX B210c

Reviews:

Related manuals for FAX B210c

Brands by name

Popular brands

Canon FAX B210c, User Manual

Search results

Summary of Contents for FAX B210c

Reviews:

Related manuals for FAX B210c

Brands by name

Popular brands