Canon EOS 90D Advanced User'S Manual Download Page 610

Page: 610 / 646

610

Troubleshooting Guide

Operation sound and mechanical sound can be heard during
movie playback.



If you operate the camera’s dials or lens during movie recording, the

operation sound will also be recorded. Using the Directional Stereo

Microphone DM-E1 (sold separately) is recommended (

296).

The movie appears to freeze momentarily.



If there is a drastic change in the exposure level during autoexposure

movie recording, the recording will stop momentarily until the brightness

stabilizes. In such a case, shoot in the <

> mode (

279).

No picture appears on the television.



Make sure

[

: Video system]

is set to

[For NTSC]

[For PAL]

correctly for the video system of your television.



Make sure the HDMI cable’s plug is inserted all the way in (

344).

There are multiple movie ﬁ les for a single movie recording.



If the movie ﬁ le size reaches 4 GB, another movie ﬁ le will be created

automatically (

293). However, if you use an SDXC card formatted

with the camera, you can record a movie in a single ﬁ le even if it exceeds

4 GB.

Summary of Contents for EOS 90D







































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS 90D

Reviews:

Brands by name

Popular brands

Canon EOS 90D, Advanced User'S Manual

Search results

Summary of Contents for EOS 90D

Reviews:

Brands by name

Popular brands