Canon EOS 90D Advanced User'S Manual Download Page 590

Page: 590 / 646

590

Software

Downloading and Installing the EOS Software or Other
Dedicated Software

Always install the latest version of the software.

Update any previous versions that are installed by overwriting them with the

latest version.

Do not connect the camera to a computer before you install the software. The

software will not be installed correctly.

The software cannot be installed unless the computer is connected to the

Internet.

Previous versions cannot display images from this camera correctly. Also,

processing RAW images from this camera is not possible.

Download the software.



Connect to the Internet from a computer and access the following

Canon website.

www.canon.com/icpd



Enter the serial number on the bottom of the camera, then download

the software.



Decompress it on the computer.



For Windows

Click the displayed installer ﬁ le to start the installer.



For Macintosh

A dmg ﬁ le will be created and displayed. Follow the steps below to

startup the installer.

Summary of Contents for EOS 90D







































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS 90D

Reviews:

Brands by name

Popular brands

Canon EOS 90D, Advanced User'S Manual

Search results

Summary of Contents for EOS 90D

Reviews:

Brands by name

Popular brands