Canon EOS 90D Advanced User'S Manual Download Page 10

Page: 10 / 646

Compatible Cards

The following cards can be used with the camera regardless of capacity.

If the card is new or was previously formatted (initialized) by another
camera or computer, format the card with this camera

(

511)



SD/SDHC/SDXC memory cards

UHS-II and UHS-I cards supported.

Cards that Can Record Movies

When recording movies, use a high-capacity card with ample performance

(fast enough writing and reading speeds) for the movie recording size. For

details, see

618.

In this manual, “card” refers to SD memory cards, SDHC memory

cards, and SDXC memory cards.

The camera does not come with a card for recording photos/
movies.

Please purchase it separately.

Summary of Contents for EOS 90D







































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS 90D

Reviews:

Brands by name

Popular brands

Canon EOS 90D, Advanced User'S Manual

Search results

Summary of Contents for EOS 90D

Reviews:

Brands by name

Popular brands