Canon EOS 70D Basic Instruction Manual Download Page 596

Page: 596 / 678

432

If there is a problem with the camera, an
error message will appear. Follow the on-
screen instructions.

* If the error still persists, write down the error number and contact your

nearest Canon Service Center.

Error Codes

Number

Error Message and Solution

Communications between the camera and lens is faulty. Clean the
lens contacts.

Clean the electrical contacts on the camera and lens, use a Canon
lens, or remove and install the battery pack again (p.19, 20, 30).

Card cannot be accessed. Reinsert/change card or format card
with camera.

Remove and insert the card again, replace the card, or format the
card (p.31, 57).

Cannot save images because card is full. Replace card.

Replace the card, erase unnecessary images, or format the card
(p.31, 57, 322).

The built-in flash could not be raised. Turn the camera off and on
again.

Operate the power switch (p.35).

Sensor cleaning could not be performed. Turn the camera off and
on again.

Operate the power switch (p.35).

10, 20
30, 40
50, 60
70, 80

An error prevented shooting. Turn the camera off and on again or
re-install the battery.

Operate the power switch, remove and install the battery pack
again, or use a Canon lens (p.30, 35).

Error number

Cause and countermeasures

Summary of Contents for EOS 70D







































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS 70D

Reviews:

Related manuals for EOS 70D

Brands by name

Popular brands

Canon EOS 70D, Basic Instruction Manual

Search results

Summary of Contents for EOS 70D

Reviews:

Related manuals for EOS 70D

Brands by name

Popular brands