Canon EOS 70D, Basic Instruction Manual

Page: 269 / 678

105
S
Selecting the AF Area
N
You can manually select the AF point or zone. If 19-point automatic
selection AF + AI Servo AF has been set, you can select any position
where AI Servo AF is to start.
1
Press the <
S
> or <
B
> button.
(
9
)
X
The AF points will be displayed in the
viewfinder.
In the Zone AF mode, the selected
zone will be displayed.
2
Select an AF point.
The AF point selection will change in
the direction you tilt <
9
>. If you
press <
0
>, the center AF point (or
center zone) will be selected.
You can also select a horizontal AF
point by turning the <
6
> dial and
select a vertical AF point by turning
the <
5
> dial.
In the Zone AF mode, turning the
<
6
> or <
5
> dial will change the
zone in a looping sequence.
Selecting the AF Point Manually
When you hold down the <
Q
> button and turn the <
6
> dial, you can
select a vertical AF point.
When you press the <
S
> or <
B
> button, the LCD panel displays the
following:
• 19-point automatic selec ion AF and Zone AF (manual zone selection):
AF
• 1 pt AF (Manual selection): SEL (Center)/ SEL AF (Off center)
With [
8
C.Fn II-10: Manual AF pt. selec. pattern ], you can set either
[ Stops at AF area edges ] or [ Continuous ] (p.373).