Canon EOS 70D Basic Instruction Manual Download Page 172

Page: 172 / 678

Icons in this Manual

: Indicates the Main Dial.

: Indicates the Quick Control Dial.

> <

: Indicates the Multi-controller and the push

direction.

: Indicates the Setting button.

: Indicates that the corresponding function

remains active for 4 sec., 6 sec., 10 sec., or 16
sec. respectively after you let go of the button.

* In this manual, the icons and markings indicating the camera’s buttons, dials,

and settings correspond to the icons and markings on the camera and on the
LCD monitor.

: Indicates a function that can be changed by pressing the

> button and changing the setting.

: When shown on the upper right of a page, it indicates that

the function is available only in the Creative Zone modes
(p.24).

(p.**)

: Reference page numbers for more information.

: Warning to prevent shooting problems.

: Supplemental information.

: Tips or advice for better shooting.

: Problem-solving advice.

Basic Assumptions

All operations explained in this manual assume that the power switch
is set to <

> and the <

> switch is set down (Multi function

lock released) (p.35, 48).

It is assumed that all the menu settings and Custom Functions are
set to their defaults.

The illustrations in this manual show the camera attached with the
EF-S18-135mm f/3.5-5.6 IS STM lens as an example.

Conventions Used in this Manual

Summary of Contents for EOS 70D







































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS 70D

Reviews:

Related manuals for EOS 70D

Brands by name

Popular brands

Canon EOS 70D, Basic Instruction Manual

Search results

Summary of Contents for EOS 70D

Reviews:

Related manuals for EOS 70D

Brands by name

Popular brands