Canon EOS 70D Basic Instruction Manual Download Page 398

Page: 398 / 678

Using AF to Focus (AF Method)

234

Select an AF point.

When a face is detected, the <

frame will appear over the face to be
focused.

If multiple faces are detected, <

will be displayed. Use <

> to move

the <

> frame over the face you

want to focus on.

You can also tap the LCD monitor
screen to select the face or subject. If
the subject is not a face, <

> will be

displayed.

If no faces can be detected, or if you
tap the LCD monitor but do not select
any face or subject, the camera will
switch to [

FlexiZone - Multi

] with

automatic selection (p.236).

Focus the subject.

Press the shutter button halfway to
focus.

When focus is achieved, the AF point
will turn green and the beeper will
sound.

If focus is not achieved, the AF point
will turn orange.

Take the picture.

Check the focus and exposure, then
press the shutter button completely to
take the picture (p.216).

Summary of Contents for EOS 70D







































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS 70D

Reviews:

Related manuals for EOS 70D

Brands by name

Popular brands

Canon EOS 70D, Basic Instruction Manual

Search results

Summary of Contents for EOS 70D

Reviews:

Related manuals for EOS 70D

Brands by name

Popular brands