Canon EOS-1 D X Mark II G, Instruction Manual

Page: 451 / 562

451
7
Custom Controls
During metering, you can select an AF point directly with the <
5
> or
<
9
> dial without pressing the <
S
> button.
*5: With the Quick Control Dial setting screen
displayed, you can press the <
B
> button, then
set the direction for switching the AF point for when
the <
5
> dial is turned. The [ Direction: AF point
switching ] settings for [ Horizontal ] and [ Vertical ]
will work for Single-point Spot AF, Single-point AF,
Man. select.: AF point expansion, and Expand AF
area: Surround. The [
Direction: Zone AF frame
switch ] settings for [ Cycle through the zones ],
[ Horizontal ], and [ Vertical ] will work with Zone AF.
*6: On the Multi-controller setting screen, press the <
B
> button and you can select
the AF point ([ Switch to center AF point ] or [ Switch to registered AF point ]) the
camera will switches to when you press the center of <
9
>. To register the AF point,
see page 448.
During metering, you can select an AF point directly with <
5
> without
pressing the <
S
> button. When this function is set, the functions of the
<
O
> and <
S
> buttons will be switched between them. By holding
down the <
S
> button and turning the <
6
> dial, you can set the
exposure compensation or aperture.
*7: With the setting screen displayed, you can press the <
B
> button, then set the
direction for switching the AF point for when the <
5
> dial is turned. The [ Direction:
AF point switching ] settings for [ Horizontal ] and [ Vertical ] will work for Single-point
Spot AF, Single-point AF, Man. select.: AF point expansion, and Expand AF area:
Surround. The [
Direction: Zone AF frame switch ] settings for [ Cycle through the
zones ], [ Horizontal ], and [ Vertical ] will work with Zone AF.
: Direct AF point selection
: Select AF point
O
z
S
( during metering)