Chapter 4
4-40
F-4-48
4) Start service mode as follows: press the User Mode key, press the 2 and 8 keys at the
same time, and press the User Mode key once again.
5) Make the following selections: FEEDER>ADJUST>DOCST. Then, change the setting
to make adjustments.
- if A >/= 1 mm, increase the setting (so that the margin will be increased).
- if B >/= 1 mm, decrease the setting (so that the margin will be decrease).
(unit: 0.5 mm)
(range: -30- to 10; -5 to +5 mm)
6) Make a copy of the Test Chart once again, and see the image is as indicated.
4.3.1.12
White Level
0003-2377
1) Place A4 or LTRR paper on the copyboard glass, and close the machine.
Make sure that the paper is not too small. Otherwise, white level may not be adjusted.
A
B
Summary of Contents for DADF-M1
