![background image](http://html.mh-extra.com/html/canon/dadf-m1/dadf-m1_service-manual_59598148.webp)
Chapter 4
4-41
2) Make the following selections on the Service Mode screen to bring up the Adjustment
screen: COPIER>FUNCTION>CCD.
3) Touch [DF-WLVL1] to highlight.
4) Press the OK key.
In response, the machine runs an auto adjustment session, and will indicate 'OK!' if it ends
normally.
5) Remove the paper from the copyboard glass, and place it in the original pickup tray of
the machine.
6) Press [DF-WLVL2] on the touch panel to highlight.
7) Press the OK key.
In response, the machine will run an auto adjustment session (duplexing stream reading).
8) Press the Reset key twice to end service mode.
4.3.1.13
Adjusting the Hinge Pressure
0003-1932
1) Open the ADF, and measure the height of the point at which it stops closing when let go.
2) Check to see if the height is 10 to 20 cm in range.
<If Not As Indicated>
1. if 10 cm or less, turn it counterclockwise using a hex wrench to make adjustments.
2. if 20 cm or more, turn it clockwise using a hex wrench to make adjustments.
Memo
Service Tool
hex wrench (8 mm); CK - 0540
Summary of Contents for DADF-M1
