![background image](http://html.mh-extra.com/html/canon/dadf-m1/dadf-m1_service-manual_59598101.webp)
Chapter 3
3-29
F-3-70
4) Move the original width volume [4]
toward the front or the rear to make
adjustments.
5) Tighten the screw [1] you have loosened
and the screw you have fitted in the
adjusting angular hole [3].
6) When done, attach the cover [2].
7) Make copies of the Test Chart once
again, and check to see that the images are
as indicated.
3.5.3
Pressurization Solenoid
3.5.3.1
Removing the
Front Cover
0003-8107
Refer to Procedure 3.2.1
3.5.3.2
Removing the
Locking Solenoid
0003-8037
1) Remove the 2 screws [1] and the spring
[2]; then, detach the locking solenoid [3].
F-3-71
3.5.4
ADF Driver PCB
3.5.4.1
Removing the
Rear Cover
0003-8100
Refer to Procedure 3.2.2
3.5.4.2
Removing the
ADF Driver PCB
0004-0744
1) Remove the 3 screws [1], and
disconnect the 7 connectors [2]; then,
detach the harness guide [3].
[1]
[2]
[3]
[4]
[2]
[3]
[1]
Summary of Contents for DADF-M1
