Canon DADF-M1, Service Manual

Page: 139 / 171

Chapter 4
4-32
6) Place the Test Chart in the machine once again, and make a copy; then, check to see that
the angle is a right angle.
If the following image appears after adjusting the right angle (i.e., if paper moves askew),
go to the next adjustment to remove the skew (registration roller). In principle, the foregoing
adjustment should correct the angle.
F-4-38
7) Remove the screw [1], and fit it and temporarily tighten it in the screw hole [2].
F-4-39
- if A>B, move up the plate [1] to make adjustments.
- if A<B, move down the place [1] to make adjustments.
A
B
[1]
[2]