![background image](http://html.mh-extra.com/html/canon/dadf-m1/dadf-m1_service-manual_59598100.webp)
Chapter 3
3-28
3.5.2.3
Mounting the
Original Width
Volume
0004-0491
1) Move the side guide [1] as wide as
possible.
F-3-68
2) Turn the gear [2] fully
counterclockwise, and mount it so that the
arrows [3] match.
If you have replaced the original width
volume, be sure to adjust the position of the
side guide plate.
3.5.2.4
Adjusting the
Side Guide Plate
0004-9326
Adjusting the Side Guide Plate of the
ADF Pickup Tray
1) Open the feeder cover, and detach the
inside cover.
2) Remove the 3 mounting screws [1], and
detach the cover [2].
F-3-69
3) Loosen the mounting screw [1], and
remove the screw [2] from the positioning
hole; then, temporarily fit it in the
adjusting angular hole [3].
if A>1 mm, move the volume unit
[4] toward the front.
if B>1 mm, move the volume unit
[4] toward the rear.
[2]
[3]
[3]
[1]
[1]
[1]
[2]
Summary of Contents for DADF-M1
