manualshive.com logo in svg

Canon CX 350, User Manual

Share
Download
Canon CX 350 User Manual Download Page 16

Safety Warnings and Precautions

9

Moving the Printer

●

Call the dealer for advice before you ship the printer a long distance or move the 
printer by car or truck where it may be subjected to shock and vibration. Moving the 
printer without the proper preparation could subject it to shocks and vibrations 
which could damage the printer and cause a fire.

●

Before you move the printer to another location in the same building, disconnect the 
power cord and make sure that all other cables are disconnected.

●

The printer weighs 13 kg (28.6 lb.). When you lift 
the printer, be sure to hold it at the front side. If you 
strain to lift the printer, you could drop the printer 
and hurt yourself. To avoid dropping the printer 
and causing personal injury, never grip the feeder 
cover or the stacker.

●

Always hold the printer level and carry it slowly. If ink is spilled inside the printer 
while moving it, this could cause a fire or serious electrical shock or damage the 
printer.

●

Do not remove the ink cartridges before you move or ship the printer. If you remove 
the ink cartridges before you move or ship the printer, ink could leak from the pins 
in the ink cartridge slots and cause stains to your clothing or inside the printer.

Warning

Caution

Summary of Contents for CX 350





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands