A
A-2
Troubleshooting
Frame Type selection
(Network Setup>Protocol
Setup>IPX/SPX Setup)
Enable NDS
(Network Setup>Service
Setup >PServer
Setup >NDS
Setup)
Invalid frame size.
The network hub is not connected to a Novell server when
the ColorPASS tries to bind.
Warning! IPX network
number is zero.
No other IPX machine can be found on the network, or
the network hub is not connected to the network when the
ColorPASS tries to bind. When this occurs, the network
number defaults to zero.
No NDS trees found.
No NDS trees were found on the Novell network. Check
to see that the frame types on the ColorPASS are
properly
configured.
Select NDS Tree
(Network Setup>Service
Setup >PServer Setup >
NDS Setup)
Warning! Selecting a new
NDS tree deletes
Bindery
setup.
You have previously connected the ColorPASS to a
different NDS tree. NetWise supports only a single NDS
tree connection. To avoid a potential conflict with an
existing tree connection (for example, if the connection
was made through a NetWare 4.x server in emulation
mode), all bindery settings will be deleted.
If you choose OK, and choose Yes in the following message
(Delete Bindery setup and continue?), bindery settings are
deleted and have to be re-entered in Bindery Setup.
To avoid deleting the bindery settings, press Menu, or
select OK and choose No in the following message (Delete
Bindery setup and continue?).
Repeat NDS Setup without changing the NDS tree, or exit
to Bindery Setup to review your current bindery settings.
Navigating NDS tree
(Network Setup>Service
Setup >PServer Setup >
NDS Setup)
___ is empty.
The chosen container contains no sub-containers or objects
relevant to the current mode of navigation.
Bindery Setup
(Network Setup>Service
Setup >PServer Setup >
Bindery Setup)
If you also plan to use NDS,
set up NDS before Bindery.
No NDS settings are present. You are reminded to perform
NDS Setup before Bindery Setup in case your network
includes both NDS and bindery servers.
After this Setup screen
This message
Means