Canon 4460B003, Instruction Manual

Page: 50 / 402

50
Before You Start
You can change the auto power-off time for the camera to turn off
automatically after a certain period of non-operation. If you do not want
the camera to turn off automatically, set this to [
Off ]. After the power
turns off, you can turn on the camera again by pressing the shutter
button or other button.
1
Select [Auto power off].
Under the [
5
] tab, select [ Auto
power off ], then press <
0
>.
2
Set the desired time.
Select the desired setting, then press
<
0
>.
You can set how long the image is displayed on the LCD monitor
immediately after capture. To keep the image displayed, set [
Hold ]. To
not have the image displayed, set [ Off ].
1
Select [Image review].
Under the [
1
] tab, select [ Image
review ], then press <
0
>.
2
Set the desired time.
Select the desired setting, then press
<
0
>.
3
Setting the Power-off Time/Auto Power Off
3
Setting the Image Review Time
Even if [ Off ] has been set, the LCD monitor will turn off automatically after
30 min. to save power. (The camera’s power does not turn off.)
If [ Hold ] is set, the image will be displayed until the auto power off time elapses.