Canon 4460B003, Instruction Manual

Page: 253 / 402

253
3
Custom Function Settings
N
C.Fn I -5 Bracketing sequence
The AEB shooting sequence and white balance bracketing sequence can
be changed.
0: 0, -, +
1: -, 0, +
C.Fn I -6 Safety shift
0: Disable
1: Enable (Tv/Av)
This takes effect in the shutter-priority AE (
s
) and aperture-priority AE
(
f
) modes. When the subject’s brightness changes erratically and the
standard auto exposure cannot be obtained, the camera will change the
exposure setting automatically to obtain a standard exposure.
C.Fn I -7 Flash sync. speed in Av mode
0: Auto
Normally, the sync speed will be set automatically within 1/250 sec. to
30 sec. to suit the subject brightness. High-speed sync can also take
effect.
1: 1/250-1/60 sec. auto
When flash is used with aperture-priority AE (
f
), this prevents a slow
flash-sync speed from being set automatically in low-light conditions. It
is effective for preventing subject blur and camera shake. However,
while the subject will be properly exposed with the flash, the background
will come out dark.
2: 1/250 sec. (fixed)
The flash-sync speed is fixed to 1/250 sec. This more effectively
prevents subject blur and camera shake than with setting 1. However,
the background may come out darker than with setting 1.
AEB
WB Bracketing
B/A Direction M/G Direction
0 : Standard exposure 0 : Standard white balance 0 : Standard white balance
- : Decreased exposure - : Blue bias - : Magenta bias
+ : Increased exposure + : Amber bias + : Green bias