Canon 4460B003 Instruction Manual Download Page 180

Page: 180 / 402

180

Under the [

] tab, the [

Movie rec.

size

] menu enables you to select the

movie’s image size [

****x****

] and frame

rate [

] (frames recorded per second).

The

(frame rate) switches

automatically depending on the [

Video system

] setting.

Image size

[

1920x1080

]

: Full HD (Full High-Definition) recording quality.

[

1280x720

]

: HD (High-Definition) recording quality.

[

640x480

]

: Standard-definition recording quality. The aspect

ratio will be 4:3.

[

Crop 640x480

] : Standard-definition recording quality. The aspect

ratio will be 4:3. It will give a telephoto effect of
approx. 7x. This shooting mode is called Movie
crop.

Frame rate

(fps: frames per second)

[

] [

] : For areas where the TV format is NTSC (North America,

Japan, Korea, Mexico, etc.).

[

] [

] : For areas where the TV format is PAL (Europe, Russia,

China, Australia, etc.).

[

]

: Mainly for motion pictures.

Setting the Movie-recording Size

Notes for Movie crop

Use a tripod to prevent hand-held camera shake.

The Movie crop image cannot be magnified for focusing.

Even if the AF mode has been set to [

Quick mode

], it will switch

automatically to [

Live mode

] during movie shooting. Also, in [

Live

mode

], the AF point is displayed larger than with other recording sizes.

Noise and dots of light may be more noticeable than in other recording
sizes.

Focusing may be difficult if the AF point covers both a near and far
subject.

Still photos cannot be taken.

Summary of Contents for 4460B003



















































































































































































































































































































































































































Search results

Summary of Contents for 4460B003

Reviews:

Related manuals for 4460B003

Brands by name

Popular brands

Canon 4460B003, Instruction Manual

Search results

Summary of Contents for 4460B003

Reviews:

Related manuals for 4460B003

Brands by name

Popular brands