Canon 4460B003 Instruction Manual Download Page 207

Page: 207 / 402

207

You can playback the images in the card as an automatic slide show.

Select [Slide show].

Under the [

] tab, select [

Slide

show

], then press <

Select the images to be played.

Press the <

> key to select the

desired option, then press <

[All images/Movies/Stills]

Press the <

> key to select one of

the following: [

All images/

Movies/

Stills

]. Then press

[Date/Folder/Rating]

Press the <

> key to select one of

the following: [

Date/

Folder/

Rating

When <

> is highlighted,

press the <

> button.

Press the <

> key to select the

desired option, then press <

Slide Show (Auto Playback)

Number of images to be played

Item

Playback Description

All images

All the still photos and movies in the card will be played back.

Date

Still photos and movies taken on the selected shooting date will
be played back.

Folder

Still photos and movies in the selected folder will be played
back.

Movies

Only the movies in the card will be played back.

Stills

Only the still photos in the card will be played back.

Rating

Only the still photos and movies with the selected rating will be
played back.

Summary of Contents for 4460B003



















































































































































































































































































































































































































Search results

Summary of Contents for 4460B003

Reviews:

Related manuals for 4460B003

Brands by name

Popular brands

Canon 4460B003, Instruction Manual

Search results

Summary of Contents for 4460B003

Reviews:

Related manuals for 4460B003

Brands by name

Popular brands