Canon 4460B003 Instruction Manual Download Page 160

Page: 160 / 402

160

The AF modes available are [

Live mode

], [

Live mode

] (face

detection, p.161), and [

Quick mode

] (p.165).

If you want to achieve precise focus, set the lens focus mode switch to
<

>, magnify the image, and focus manually (p.167).

Select the AF mode.

Under the [

] tab, select [

AF mode

While the Live View image is
displayed, you can press the <

button to select the AF mode on the
setting screen displayed.

The image sensor is used to focus. Although AF is possible with the
Live View image displayed,

the AF operation will take longer than

with the Quick mode

. Also, achieving focus may be more difficult than

with the Quick mode.

Display the Live View image.

Press the <

> button.

The image will appear on the LCD
monitor.

The AF point < > will appear.

Move the AF point.

You can use <

> to move the AF

point to where you want to focus (it
cannot go to the edges of the picture).

To return the AF point to the center,
press the <

> button.

Using AF to Focus

Selecting the AF Mode

Live Mode:

AF point

Summary of Contents for 4460B003



















































































































































































































































































































































































































Search results

Summary of Contents for 4460B003

Reviews:

Related manuals for 4460B003

Brands by name

Popular brands

Canon 4460B003, Instruction Manual

Search results

Summary of Contents for 4460B003

Reviews:

Related manuals for 4460B003

Brands by name

Popular brands