Canon 4460B003, Instruction Manual

Page: 101 / 402

101
If the image comes out dark or the contrast is low, the brightness and
contrast can be corrected automatically. The default setting is [
Standard ].
With JPEG images, the correction is done when the image is captured.
1
Select [Auto Lighting Optimizer].
Under the [
2
] tab, select [ Auto
Lighting Optimizer ], then press
<
0
>.
2
Set the correction setting.
Select the desired setting, then press
<
0
>.
3
Take the picture.
The image will be recorded with the
brightness and contrast corrected if
necessary.
3
Auto Lighting Optimizer
N
With correction Without correction
If [
8
C.Fn II -3: Highlight tone priority ] is set to [ 1: Enable ], the Auto
Lighting Optimizer will be set automatically to [ Disable ] and you cannot
change this setting.
Depending on the shooting conditions, noise might increase.
If a setting other than [ Disable ] is set and you use exposure
compensation, flash exposure compensation, or manual exposure to
darken the exposure, the image might still come out bright. If you want a
darker exposure, set this to [
Disable ] first.
In Basic Zone modes, [ Standard ] is set automatically.