Canon 4460B003 Instruction Manual Download Page 195

Page: 195 / 402

195

Searching for Images Quickly

With the single image display, you can turn the <

> dial to jump through

the images.

Select the jump method.

In the [

Image jump w/

] menu,

select the jump method, then press
<

Display images one by one

Jump 10 images

Jump 100 images

Display by date

Display by folder

Display movies only

Display stills only

Display by image rating

(p.198)

Turn the <

> dial to select the

rating.

Browse by jumping.

Press the <

> button to playback

images.

On the single-image display, turn the
<

> dial.

The jump display will proceed
according to the selected jump method.

Jump through Images (Jump display)

Playback position

Jump method

To search images according to the shooting date, select [

Date

]. Turn the

> dial to display the shooting date.

To search images according to folder, select [

Folder

If the card contains both [

Movies

] and [

Stills

], select ei her one to

display only movies or stills.

If no images match the selected [

Rating

], browsing through the images

with <

> is not possible.

Summary of Contents for 4460B003



















































































































































































































































































































































































































Search results

Summary of Contents for 4460B003

Reviews:

Related manuals for 4460B003

Brands by name

Popular brands

Canon 4460B003, Instruction Manual

Search results

Summary of Contents for 4460B003

Reviews:

Related manuals for 4460B003

Brands by name

Popular brands