Canon 3303B002 User Manual Download Page 77 | Manualshive

Page: 77 / 86

background image

76

Troubleshooting

MEMORY FULL

NO INK

NO TEL #

REC’D IN MEMORY

RECOMEND NEW CRT

REMOVE DOCUMENT

SET DOCUMENT IN CORRECT POSITION

TX/RX CANCELLED

Cause

Action

The fax’s memory is full because it has
received too many documents, or a
very long or detailed document.

Print and delete any documents stored in memory (see page 39). Then start
again.

The fax’s memory is full because you
either tried to send or copy too many
pages at once, or you tried to send or
copy a very long or detailed document,
using memory sending.

Free up space in the fax’s memory by printing or deleting any documents in
memory you no longer need (see page 39).
If multiple pages are loaded, separate the pages into smaller stacks. If not, try
sending the document by direct sending (see page 24).

Cause

Action

Ink has run out.

Replace the FINE Cartridge (see page 50).

Cause

Action

The one-touch speed dialing button or
coded speed dialing code you entered
has not been registered.

Register the one-touch speed dialing button or coded speed dialing code (see
page 18).

Cause

Action

The fax received the document in
memory because paper or ink ran out,
a paper jam occurred, or the incorrect
FINE Cartridge was installed.

Load paper in the Rear Tray (see your setup sheet or page 22), replace the
FINE Cartridge (see page 50) or clear the paper jam (see page 60).
Print any documents stored in memory (see page 39).

The fax receives documents in memory
because the <AUTO PRINT> setting is
set to <OFF>.

Set the <AUTO PRINT> setting to <ON>. This enables to print received faxes
automatically (see page 37).

Cause

Action

Ink is low.

Replace the FINE Cartridge (see page 50).

Cause

Action

The document is set while printing.

Remove the document. Press [Stop/Reset] and try printing again.

Cause

Action

The document cannot be correctly
detected or the document is too small.

Make sure the document meets the requirements and is correctly loaded. If
necessary, reload the document and press [Start/Copy]. See “Document
Requirements” on page 20 and “Loading Documents and Paper” on page 22.

Cause

Action

You pressed [Stop/Reset] to cancel the
transmission.

If required, try sending again.

«
...
75
76
77
78
79
...
»

Summary of Contents for 3303B002























































































Reviews:

No comments

Related manuals for 3303B002

Brand: Janome Pages: 41

Brand: Jack Pages: 66

Brand: Jack Pages: 132

Brand: Necchi Pages: 122

Brand: Singer Pages: 66

Lumina 20 M26036TD

Brand: Minuteman Pages: 26

Brand: Garudan Pages: 79

Brand: Reliable Pages: 1

Brand: Dixie Narco Pages: 14

ReadySpace 1610

Brand: Tennant Pages: 2

Memory Craft 550E

Brand: Janome Pages: 84

Brand: U.S. Products Pages: 10

GBC WireBind W18

Brand: GBC Pages: 38

Brand: T-COM Pages: 6

Brand: Bernette Pages: 72

Brand: Cameo Pages: 56

Brand: Singer Pages: 60

Brand: GBC Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands