18
Before Using Your Machine
Registering One-touch Speed Dialing Numbers and
Names
One-touch speed dialing allows you to dial a number by pressing a single button. Before you can use
one-touch speed dialing, you must register the receiving number with your fax.
You can also register the name of the party; the name appears on the printout of the ONE-TOUCH
SPEED DIAL TELEPHONE NO. LIST.
1
Press [Menu].
2
Use [
{
] or [
}
] to select <TEL REGISTRATION>, then press [Start/Copy]. The LCD
displays <1-TOUCH SPD DIAL>.
3
Press [Start/Copy]. The LCD displays <01=>.
4
Use [
{
] or [
}
] to select the number of the one-touch speed dialing button (01-09)
under which you want to register the number, then press [Start/Copy] twice.
If a number is already registered under this one-touch speed dialing button, the number is
displayed on the LCD.
5
Enter the party’s number (up to 40 digits) using the numeric buttons, then press
[Start/Copy] twice.
6
Enter the party’s name (up to 16 letters) using the numeric buttons, then press
[Start/Copy] to register the name (see page 13).
7
To assign additional one-touch speed dialing numbers, repeat from step 4.
To finish, press [Stop/Reset].
Note
It is recommended to print out a copy of the ONE-TOUCH SPEED DIAL TELEPHONE NO. LIST and keep
it for reference.
See “Activity Reports” on page 48 for details on printing the list.
Note
To delete the name and number registered under the one-touch speed dialing button, press [Clear]
and [Start/Copy] after you perform steps 1 to 4.
TEL=250xxx_
CANON
:A
