Canon 3303B002 User Manual Download Page 53

Page: 53 / 86

Routine Maintenance

However, the error detection function is disabled after the error indication is canceled, therefore,
Low Ink Warning message does not appear later on. When you install a new FINE Cartridge, the
Low Ink Warning is enabled automatically.

Replacing a FINE Cartridge

Make sure the fax is turned on.

Open the Cover until it locks into place securely at the second bump.

Remove the empty FINE Cartridge.

(1)

Push down the FINE Cartridge.

(2)

Remove the FINE Cartridge.

Prepare a replacement FINE Cartridge.

(1)

Unpack a new FINE Cartridge and remove the
Protective Tape (A) gently.

Note

Do not replace the FINE Cartridge while the fax is printing or performing another operation.

If you need to unplug the fax, wait until it returns to standby mode (time and receive mode

displayed on the LCD). Otherwise the Holder may not be in its home position, causing the FINE

Cartridge to remain uncapped and dry out.

Caution

Do not try to manually move or stop the Holder.

Do not touch the metallic parts or other parts inside the machine.

Important

Handle FINE Cartridges carefully to avoid

staining your clothes or surrounding area.

Discard empty FINE Cartridges according to local

laws and disposal regulations.

Important

Shaking FINE Cartridge may cause ink to spill out

and stain clothing or the surrounding area.

Handle FINE Cartridge carefully.

Be careful not to stain your clothes and hands

with ink on the removed protective tape.

Do not reattach the Protective Tape once you

have removed it.

Once the Protective Tape is removed, do not

touch the electrical contacts (B) or Print Head

Nozzles (C) on the FINE Cartridge. The machine

may not print out properly if you touch it.

(1)

(2)

(A)

(C)

(B)

Summary of Contents for 3303B002























































































Search results

Summary of Contents for 3303B002

Reviews:

Related manuals for 3303B002

Brands by name

Popular brands

Canon 3303B002, User Manual

Search results

Summary of Contents for 3303B002

Reviews:

Related manuals for 3303B002

Brands by name

Popular brands