Canon 3303B002 User Manual Download Page 6 | Manualshive

Page: 6 / 86

background image

5

Introduction

Caution

You may cause injury or damage the machine if you ignore any of these safety precautions.

Legal Limitations

It may be unlawful to make copies of, scan, print, or use reproductions of the following documents.
The list provided is non-exhaustive. When in doubt, check with a legal representative in your
jurisdiction.

Choosing a location

Do not install the machine in a location that is unstable or subject to excessive vibration.

Do not install the machine in locations that are very humid or dusty, in direct sunlight,
outdoors, or close to a heating source.
To avoid the risk of fire or electric shocks, install the machine in a location with an ambient
temperature range of 41°F to 95°F (5°C to 35°C) and humidity of 10% to 90%
(condensation free).

Do not place the machine on a thick rug or carpet.

Do not place the machine with its back attached to the wall.

Power supply

Ensure that the area around the power outlet is kept clear at all times so you can easily
unplug the power cord if necessary.

Never remove the plug by pulling on the cord.

Do not use an extension lead/cord.

Working around the
machine

Never put your hands or fingers in the machine while it is printing.

Do not place any object on the machine.

Do not place metal objects (paper clips, staples, etc.) or containers of flammable solvents
(alcohol, thinners, etc.) on top of the machine.

If any foreign object (metal or liquid) fall into the machine, unplug the power cord and call
for service.

Do not transport or store the machine on a slant, vertically or upside-down, as the ink may
leak and damage the machine.

FINE Cartridge (Ink
Cartridge)

Keep FINE Cartridges (Ink Cartridges) out of the reach of children.
In case ink is accidentally licked or swallowed, rinse out mouth or give one or two glasses of
water to drink.
If irritation or discomfort occurs, obtain medical advice immediately.

In case ink gets in contact with eyes, rinse with water immediately.
In case ink gets in contact with skin, wash with soap and water immediately.
If irritation to eyes or skin persists, obtain medical advice immediately.

Never touch the electrical contacts on a FINE Cartridge (Ink Cartridge) after printing. The
metal parts may be very hot and could cause burns.

Do not throw FINE Cartridges (Ink Cartridges) into fire.

z

Paper money

z

Money orders

z

Certificates of deposit

z

Postage stamps (canceled or uncanceled)

z

Identifying badges or insignias

z

Selective service or draft papers

z

Checks or drafts issued by governmental
agencies

z

Motor vehicle licenses and certificates of title

z

Traveler’s checks

z

Food stamps

z

Passports

z

Immigration papers

z

Internal revenue stamps (canceled or uncanceled)

z

Bonds or other certificates of indebtedness

z

Stock certificates

z

Copyrighted works/works of art without
permission of copyright owner

«
...
4
5
6
7
8
...
»

Summary of Contents for 3303B002























































































Reviews:

No comments

Related manuals for 3303B002

Brand: KANSAI SPECIAL Pages: 21

Brand: GE Pages: 52

Brand: Fastbind Pages: 21

1600P PROFESSIONAL -

Brand: Janome Pages: 29

Brand: Windsor Pages: 28

Brand: Aficio Pages: 300

Incredible Rope Machine

Brand: Schacht Pages: 4

PROGRESSION 600ES-LED

Brand: Gamma Pages: 16

Union Special 36200L220-60

Brand: JUKI Pages: 56

NC81200 CLASSES

Brand: Carpet Sergers Pages: 30

Brand: Hefter Pages: 71

Brand: BoomToneDJ Pages: 8

VoiceAnnounce 9900CW

Brand: ClassCo Pages: 48

Brand: KENT Pages: 76

Brand: emerio Pages: 53

Brand: Necchi Pages: 52

Answering Machine

Brand: AT&T Pages: 15

Brand: Radio Shack Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands