31
Sending Faxes
8
Press [Start/Copy].
z
Press [Start/Copy] when using directory dialing.
z
The fax scans the document into memory.
9
The fax will automatically dial at the programmed time.
Sending Other Documents While the Fax is Set for Delayed Sending
You can send, receive, and copy other documents even when the fax is set for sending at a
preset time.
To send or copy other documents after setting the fax for delayed sending, simply send or copy
using any other sending procedure in this guide.
Canceling Delayed Sending
1
Press [Menu].
2
Use [
{
] or [
}
] to select <MEMORY REFERENCE>, then press [Start/Copy].
3
Use [
{
] or [
}
] to select <DELETE DOCUMENT>, then press [Start/Copy].
4
Use [
{
] or [
}
] to select the transaction number (<TX/RX NO.>) of the document
you want to delete, then press [Start/Copy]. The LCD displays <YES=( ) NO=(#)>.
z
If the LCD does not change after you press [
{
] or [
}
], this means only one transaction is
stored in memory.
z
If you are unsure of the transaction number (<TX/RX NO.>), print the MEMORY LIST (see
page 39).
5
Press [ ] to delete the document.
If you want to continue sending, press [#].
6
Press [Stop/Reset].
The fax returns to standby mode.
Note
If <MEMORY FULL> appears on the LCD during scanning, delete unnecessary documents from
the memory (see page 40), then rescan your fax.
Note
Delayed sequential broadcasting is applicable for sending one document to more than one location
at a later time when multiple fax numbers are dialed (see page 32).
TX/RX NO.
0001
