34
Chapter 1
Before Printing
(2)
Open up and set the Paper Output Tray Extension completely by pressing down the
hollow on its front side.
(3)
Press [Feed Switch] so that the Cassette Lamp (A) lights.
z
Loading Envelopes
Use either European DL or US Comm. Env. #10 size envelopes.
1
Align the envelope stack against the right side of the Cassette with the print side
face down, and the rear flaps up on the left side.
2
Slide the Paper Guides against the sides of the envelope.
Note
You can also select the paper source with the printer driver. For details, refer to the
Printer
Driver Guide
.
Important
z
Envelopes can be used only when printing from a computer.
z
Do not use envelopes with embossed or treated surfaces, a double flap, pressure seals or
sticker flaps.
z
Select either [DL Env.] or [Comm. Env. #10] according to the envelope size you are using.
z
If the print image is upside down when printing onto special envelopes, open the printer
properties dialog box then select the [Rotate 180 degrees] check box on the [Page Setup]
tab.
For information on the printer driver settings, refer to the
Printer Driver Guide
.
Note
A maximum of 5 envelopes can be loaded at once.
(1)
(2)
(3)
(A)
