Subsection 07 (LIGHTS, GAUGE AND ACCESSORIES)
6.
Defective flasher module.
- Replace flasher module, refer to FLASHER MOD-
ULE in this subsection.
HAZARD LIGHTS COME ON WITHOUT
BEING SELECTED (CE MODELS ONLY)
1.
Hazard lights switch or wiring short circuit.
- Check for water in LH multifunction switch.
- Test hazard light switch and wiring, refer to
WIRING DIAGRAM.
2.
Resistor R1 in flasher module input circuit is
open.
- Test resistor R1, refer to WIRING DIAGRAM.
TURN SIGNAL/HAZARD LIGHTS
INDICATOR IN MULTIFUNCTION GAUGE
WILL NOT COME ON WITH TURN SIGNAL
OR HAZARD LIGHTS SELECTED ON,
IGNITION SWITCH ON (CE MODELS
ONLY)
1.
Signal wire from flasher module to multifunc-
tion gauge open circuit.
- Test circuit continuity from flasher module
(3–MC2–4) to multifunction gauge (1–C1–8).
2.
Defective flasher module.
- Replace flasher module, refer to FLASHER MOD-
ULE in this subsection.
3.
Defective multifunction gauge.
- Replace multifunction gauge.
HAZARD LIGHTS INDICATOR NOT
WORKING WITH IGNITION SWITCH OFF
(CE MODELS ONLY)
1.
Diode D10 open circuit.
- Test diode, refer to WIRING DIAGRAM.
POSITION LIGHTS WILL NOT COME ON
(CE MODELS ONLY)
1.
Accessories fuse open circuit.
- Test fuse F12, refer to POWER DISTRIBUTION
subsection.
2.
Power or ground circuit wiring.
- Check wiring continuity, refer to WIRING DIA-
GRAM.
3.
Defective light bulbs
- Test/replace light bulbs.
HORN WILL NOT FUNCTION (CE MODELS
ONLY)
1.
Burnt Clock/Hazard fuse (F10)
- Check fuse
2.
Defective horn.
- Test horn by applying 12 Vdc and ground jumper
to horn.
3.
Defective horn switch.
- Test horn switch as per HORN WIRE IDENTIFI-
CATION in this subsection. Refer to WIRING DI-
AGRAM.
4.
Defective wiring.
- Check wiring continuity as per HORN WIRE
IDENTIFICATION in this subsection. Refer to
WIRING DIAGRAM.
PROCEDURES
MULTIFUNCTION GAUGE
Reseting the Maintenance Required
Message
Connect to the latest applicable B.U.D.S. software
version.
Refer to
COMMUNICATION TOOLS
AND B.U.D.S.
subsection.
Select
Vehicle
tab.
Click on the
Reset Service
button.
tmr2011-030-014_a
TYPICAL
1. Reset Service button
6
vmr2016-410
