Subsection 01 (ELECTRONIC FUEL INJECTION (EFI))
vmr2012-026-003_a
1. Remove these screws
2. Lift rear of air intake silencer as much as possi-
ble and block in this position.
3. Unplug connectors from TPS and IACV.
4. Loosen both throttle body clamps.
5. Rotate throttle body to gain access to throttle
cable.
6. Remove throttle cable cover.
vmr2012-026-004_a
Step 1: Loosen
Step 2: Rotate
Step 3: Remove
7. Rotate throttle lever and pull out cable barrel.
vmr2006-014-060_b
1. Throttle lever
2. Cable barrel
8. Remove barrel from cable.
9. Pull out throttle cable.
10. Pull out throttle body.
Installing the Throttle Body
Installation of the throttle body is the reverse of
the removal procedure. However, pay attention to
the following.
Temporarily install throttle body into position.
Properly install cable barrel to throttle cable end.
vmr2006-014-063_a
Hook cable to throttle lever.
vmr2016-423
13
