Camus Hydronics Valiant FT VA0080, Manual

Page: 40 / 79

33
# Error Description
131 FLUE2_SHORTED Flue 2 sensor shorted
132 OUTDOOR_SHORTED Outdoor sensor shorted
133 NET_FREQ_ERROR Net freq. error detected by the watchdog
134 RESET_BUTTON_ERROR Too many resets in a short time period
135 PHASE_NEUTRAL_REVERSED The live and neutral of the main voltage power supply input are reversed
136 T_EXCHANGE_BLOCK_ERROR Exchange temperature exceeded 90ºC.
137 T_CHIMNEY_OPEN Chimney sensor open
138 T_EXCHANGE1_OPEN Exchange 1 sensor open
139 T_EXCHANGE2_OPEN Exchange 2 sensor open
140 T_SELECTION1_OPEN Selection 1 sensor open
141 T_SELECTION2_OPEN Selection 2 sensor open
142 T_SELECTION3_OPEN Selection 3 sensor open
143 T_OPTIONAL1_OPEN Optional 1 sensor open
144 T_OPTIONAL2_OPEN Optional 2 sensor open
145 T_AMBIENT_OPEN Ambient sensor open
146 T_CHIMNEY_CLOSED Chimney sensor shorted
147 T_EXCHANGE1_CLOSED Exchange 1 sensor shorted
148 T_EXCHANGE2_CLOSED Exchange 2 sensor shorted
149 T_SELECTION1_CLOSED Selection 1 sensor shorted
150 T_SELECTION2_CLOSED Selection 2 sensor shorted
151 T_SELECTION3_CLOSED Selection 3 sensor shorted
152 T_OPTIONAL1_CLOSED Optional 1 sensor shorted
153 T_OPTIONAL2_CLOSED Optional 2 sensor shorted
154 T_AMBIENT_CLOSED Ambient 1 sensor shorted
155 WD_CONFIG_ERROR Watchdog fan configuration setting error
156 FLUE_PRESSURE_ERROR Flue pressure switch is closed
157 AIR_DAMPER_ERROR Air damper feedback is not received when the relative output is closed
158 T_SECONDARY_SUPPLY_OPEN Secondary circuit supply sensor open
159 T_SECONDARY_RETURN_OPEN Secondary circuit return sensor open
160 T_SECONDARY_SUPPLY_CLOSED Secondary circuit supply sensor shorted
161 T_SECONDARY_RETURN_CLOSED Secondary circuit return sensor shorted
162 FILL_WARNING
Error is generated immediately when the pressure drops below
Minimal_Pressure. Demand has stopped, but no error needs to be stored at this
time
163 FLUE_BLOCKED Flue is blocked, demand needs to be stopped with fan at ignition speed*,
but no error needed to be stored at this time
164 LOWEXFLOW_PROTECTION Flow is too low, demand needs to be stopped with fan at ignition speed*,
but no error needed to be stored at this time
165 VSUPPLY_TOO_LOW Main supply voltage too low for more than 60 seconds
166 VSUPPLY_TOO_HIGH Main supply voltage too high for more than 60 seconds