Indoor unit mus t be ins talled with CAT 3 vent pipe in acc ordance with v
ent supplier/ Manufacturer in acc ordance with loc al code. Owner must
refer to vent manufacturer’s instructions and specifications. Z-Flex
information can be found at www.novaflex.com, please refer to page 48 for
additional links.
A. Back installation
1. Insert the vent pipe through the installation holes in the wall with the terminal
sticking out.
2. Connect the elbow to the vent pipe and water heater, moving straight
backwards until the expansion screws go into the holes of the water heater.
Screw the nuts tight (pay attention to the direction of the elbow).
B. Side ins tallation:
1. Aim the holes in the water heater onto the expansion screws, hang it up and
screw the nuts tightly.
2. Put the vent pipe through the holes in the wall, and connect the elbow with the
water heater and vent pipe.
C.
Vertical installation
Please refer to local installation professional or venting manufacturer:
The installation hole in the wall needs to be sealed by fire-retardant material or
wall thimble, making sure the water heater is tight and will not come off.
1
58
Visit Us: Camplux.com
3330-A Marathon Ct Charleston, SC 29418
1(844) 538-7475
Summary of Contents for WA686M-NG
Page 2: ......
Page 83: ......
Page 84: ...Visit Us Camplux com support camplux com 3330 A Marathon Ct Charleston SC 29418 1 844 538 7475...
