Campingaz 3 Series, Operation And Maintenance

Page: 14 / 152

-14-
The centre is removable and may be replaced by one of
the accessories sold separately by Campingaz®, for
example:
- Pizza stone
- Wok
- Paella plate
The Campingaz® Culinary Modular concept therefore
allows you to transform your barbecue grill into a true
outdoor kitchen and to use a specific cooking support
depending on what you are preparing.
ADG advises that its gas barbecues should
systematically be used with accessories and
replacement parts from Campingaz. ADG accepts
no responsibility for any damage or malfunction due
to the use of accessories and/or replacement parts
from other brands.
s) PROTECTING THE ENVIRONMENT
Think about protecting the environment! Your equipment
contains materials which can be recovered or recycled.
Hand them in to the waste collection service in your
municipality and sort the packing materials.
t) BATTERY RECOMMENDATIONS
This symbol found on the batteries means that
at the end of their lives, the batteries must be
removed from the unit, and then recycled or
properly disposed of. The batteries should not be
thrown into the trash, but should be brought to a
collection point (dump...). Check with your local
authorities. Never dispose of in nature, do not incinerate:
the presence of certain substances (Hg, Pb, Cd, Zn, Ni)
in used batteries may be hazardous to the environment
and human health.
u) ELECTRICAL AND ELECTRONIC
WASTE
This symbol means that the appliance's
electrical system must be disposed of
selectively. At the end of its life, the
appliance's
electrical system must be
scrapped correctly. The electrical system must not be
disposed of with unsorted municipal waste. Selective
collection of waste promotes reuse, recycling or other
forms of recovery of recyclable materials contained in
this waste. Take the appliance's electrical system to a
waste recovery centre designed for the purpose (waste
collection point). Check with your local authorities. Never
dispose of in nature, do not incinerate: the presence of
certain hazardous substances in electrical and electronic
equipment can be harmful to the environment, and have
a potential effect on human health.
PROBLEMS
Burner won’t light
- Lack of gas supply
- Regulator does not work
- Hose, valve, jet, venturi tube or burner openings are
blocked.
- Venturi tube not seated over jet
-
The STOPGAZ system's thermocouple is not hot
enough; repeat the ignition sequence, keeping the
control button depressed for 15 to 20 seconds. If the
burner still does not light, contact the after sales
department.
Burner "pops" or blows itself out
- Check gas supply
- Check hose connections
- Contact the After Sales Service
Excessive flare-up
- Clean the protective plate above the burner.
- Clean the grease drip tray
- Grill temperature too high: lower flame
Burner lights with a match, but not with the
electronic igniter
- Faulty igniter, wire or electrode
- Check igniter cable connections
- Check condition of electrode and connection wire
- Contact the After Sales Service
Fire at any connection
- Leaking connection
- Turn off gas supply at cylinder immediately
- Tighten connections and check for leaks
- Contact After Sales Service
Incomplete flame around burner
- Defective or clogged burner: relocate the Venturi.
- Clogged jets: clean the Venturi
- Contact After Sales Service
Lack of Heat
- Clogged jet or venturi tube
- Contact After Sales Service
Fire behind control knob
- Defective tap unit
- Turn off gas supply at cylinder immediately
- Contact After Sales Service
Fire under control panel
- Turn off gas supply at cylinder immediately
- Contact After Sales Service
GB