Campbell CS616, Instruction Manual

Page: 32 / 54

CS616 and CS625 Water Content Reflectometers
Sensor lead AM16/32 CR10X
CS616-47 green 31L
CS616-48 green 32H
CS616-46,47,48 32L
RES C1
CLK C2
COM ODD H SE1
COM ODD L SE2
COM EVEN H SE3
COM EVEN L C3
;{CR10X}
;
*Table 1 Program
01: 60
Execution Interval (seconds)
1: Batt Voltage (P10)
;Measure battery voltage
1: 1 Loc [ Bat_Volt ]
2: Internal Temperature (P17)
;Measure datalogger internal temperature
1: 2 Loc [ DL_Temp ]
3: If time is (P92) ;Every 60 Minutes Start Multiplexer Measurement Loop
1: 0
Minutes (Seconds --) into a
2: 60 Interval (same units as above)
3: 11 Set Flag 1 High
4: If Flag/Port (P91)
;User can start Measurement Loop by setting Flag 1 High
1: 11 Do if Flag 1 is High
2: 30 Then Do
5: Do (P86)
;Set control port 1 high (i.e. Reset Multiplexer)
1: 41 Set Port 1 High
6: Beginning of Loop (P87)
;16 loops X 3ea CS616 measured/loop
1: 0 Delay
2: 16 Loop Count
7: Step Loop Index (P90)
;Increment input locations by 3/loop pass
1: 3 Step
8: Do (P86)
1: 72
Pulse Port 2 ;Pulse control port 2 (i.e. Multiplier Clock)
24