EMC_SPEC040_CLCR.doc
Rev. E
–
2021 10 18
63/63
Install & Operating Manual
CleanSeal V3
Adjusting Door Fit on CleanSeal Exhaust
The door should lock safely and easily and should be flush with the housing front when locked.
If necessary, this can be readjusted independently for both locks.
PLEASE NOTE:
In case of door misalignment, check hinge pin bushings first, before touching locks.
➔
For door alignment
→
Adjust the mini-latch
in the housing.
➔
For a safe lock
without friction
→
Adjust the hook
position in the door.
Adjusting door alignment
Push the mini-latch to place the lock in CLOSED position.
Reset to ex-works base setting or adjust using correction values.
Positioning values are given for lock CLOSED position.
Adjusting locking
Reset to ex-works base setting or adjust as needed.
Adjust for safe capture without pressure or friction
inside the hook.
Housing Size Latch Position Values
3P3
281,6 -0/+0,5
3P6
586,3 -0/+0,5
6P6
586,3 -0/+0,5
9P6
891,3 -0/+0,5
5,5
M3
5,5
M3
Latch Position
