EMC_SPEC040_CLCR.doc
Rev. E
–
2021 10 18
31/63
Install & Operating Manual
CleanSeal V3
IntegriBox
IntegriBox is an optional interface for remote aerosol injection and upstream pressure readings.
Up to 5 (up to 10 depending on injection line length) housings can be controlled from one box.
The Cleanroom Box features a fully welded box with identical flange and clamping system as the filter
housings, designed for integration into a wall or ceiling panel. For cutout dimensions,
see § 8.2
Stickers from the labelling chart (packaged in the accessory bag)
may be used to label port attribution in the IntegriBox.
➔
The Technical Box features the same port interfaces, plus one
additional port for the deported room pressure, integrated in
a standard cabinet, to be mounted on the wall in the technical area.
PLEASE NOTE:
Some particle loss will occur, depending on the injection tube length.
Choose the IntegriBox location carefully to minimize particle loss.
We recommend a max. of 5 housings per box with max. tube length of 20m,
where possible.
•
When using IntegriBox, the local injection port on the housing (if present) should remain sealed.
•
Avoid fittings, wherever possible, prefer consecutive tube lines.
•
Avoid fittings with restricted section and narrow bends which might partially collapse the tubes.
PLEASE NOTE:
Due to concentration loss in the tube lines, a 100% reading at the IntegriBox
would present false readings.
Both upstream 100% concentration and downstream sampling measurements
have to be done directly at the housing port.
IntegriBox
Upstream pressure port
Aerosol injection port
Size
1
Size
5
Size
5 / 10
