Cameron Scanner 2000 microEFM, Hardware User Manual

Page: 74 / 190

74
Section 4 Scanner
®
2000 microEFM
Editing the Date and Time
A user can change the date and time from the keypad.
To Edit the Date and Time:
Enter the Access menu. Press UP ARROW and ENTER
simultaneously.
+
00000000
...
00000000
...
00000000
...
00000000
...
Locate the Date and Time setting. Press ENTER four times. The words
“EDIT DATE-TIME” will appear in
the lower display and the word “no”
or “yes” will begin flashing in the top
display (default is “no”).
Press the UP ARROW to change the
setting in the top display to “YES.”
Press ENTER. “DATE MMDDYY” will
appear in the bottom display, and the
last two digits, representing the year,
will begin flashing.
Enter the month, day and year.
The format is MM.DD.YY.
To change the year, press the UP
ARROW, repeatedly if necessary,
until the last two digits of the year
are displayed (for example, for 2006,
enter “06”).
To change the day, press the LEFT
ARROW. The two middle digits will
begin flashing. Press the UP arrow
until the correct day is displayed.
Repeat the previous step to select
the first two digits and enter the
month.
Press ENTER. ”TIME HHMMSS” will
appear in the bottom display, and the
last two digits, representing seconds,
will begin flashing.
Enter the time (hour, minute, and
seconds). The format is HH.MM.SS.
To change the seconds displayed,
press the UP ARROW, repeatedly
if necessary, until the correct time
(seconds) is displayed.
To change the minutes displayed,
press the LEFT ARROW. The middle
two digits will begin flashing. Press
the UP ARROW until the correct time
(minutes) is displayed.
Repeat the previous step to select
the first two digits and enter the hour
(military time: Ex. 1 p.m. = 13).
Press ENTER. ”CONTRACT HOUR”
will appear in the bottom display.