P
age
46
- Manual
FA01876-EN
- 07/2022 - © C
AME S.p.A. - The contents of this manual may be changed at any time and without notice. - T
ranslation of the o
riginal instructions
Command 2-7
Associate a command to the connected device on 2-7.
Confi guration>
Command inputs
Command 2-7
Step-by-step (Default) - The fi rst command is to open and
the second to close.
Sequential - The fi rst command is to open, the second to
STOP, the third to close and the fourth to STOP.
Lock
Associate the electric lock/electromagnet release with a command.
Confi guration>
Functions
Lock
Deactivated (Default)
From closed
From open
From open and closed
Continue
Electromagnet 24 V
The electromagnet activates when the motor is
stationary and deactivates during a manoeuvre.
Closing thrust
When the leaves reach the closing limit-switch, the operator thrusts them towards the strike plate for a second.
Confi guration>
Functions
Closing thrust
Deactivated (Default)
Minimum
Medium
Maximum
Thrust
Before every opening or closing manoeuvre, the leaves thrust inwards to release the electric lock.
The thrust motion is performed during opening or closing, depending on where the electric lock is active. See
Function [Lock].
Confi guration>
Functions
Thrust
Deactivated (Default)
On
Removing obstacles
If the function is active, when the operator detects an obstacle via the AST control on the control board or via the sensitive
edge, the leaf movement inverts to create the space required to free the obstacle and then stops.
Confi guration>
Functions
Removing obstacles
Deactivated (Default)
On
B1-B2 output
Confi gure the contact.
Confi guration>
Functions
B1-B2 output
Bistable
Monostable: on from 1 to 180 seconds (Default 1)
