P
age
45
- Manual
FA01876-EN
- 07/2022 - © C
AME S.p.A. - The contents of this manual may be changed at any time and without notice. - T
ranslation of the o
riginal instructions
<Pre-fl ashing colour> BUS fl ashing beacon
On the BUS fl ashing beacon, set the fl ash colour for before opening and closing manoeuvres (pre-fl ash).
The function only appears if there is a BUS fl ashing beacon connected.
Confi guration>
BUS Devices>
BUS fl ashing beacon
Pre-fl ashing colour
White (Default)
Yellow
Orange
Red
Purple
Blue
Light blue
Green
<Signal error> BUS fl ashing beacon
Set the colour of the BUS fl ashing beacon in the event of an error signal.
The warning light is activated after sending a command for movement.
The function only appears if there is a BUS fl ashing beacon connected.
Confi guration>
BUS Devices>
BUS fl ashing beacon
Signal error
Deactivated (Default)
White
Yellow
Orange
Red
Purple
Blue
Light blue
Green
Signal maintenance
Set the colour of the fl ash on enabled BUS devices (fl ashing beacons and selectors) when maintenance is necessary. With the
function activated, these devices will signal that maintenance needs to be carried out at the start of each manoeuvre.
Confi gure maintenance and set the number of manoeuvres. See function [Confi gure maintenance].
The function only appears if there is a BUS fl ashing beacon or a BUS selector connected.
Confi guration>
BUS Devices>
BUS device lights
Signal maintenance
Deactivated (Default)
White
Yellow
Orange
Red
Purple
Blue
Light blue
Green
