CAME PXC08, Programming Manual

Page: 6 / 36

Page
6
- Manual:
FA00458-EN
- vers.
1
- 04/2017 - © C
AME S.p.A. - The data and information shown in this manual ar
e t
o be consider
ed as subject t
o change at any time and without the need for any advance warning.
ENGLISH
SYSTEM TEST
SYSTEM 02
*
TEST
SYSTEM
▲
▼
▼ ▲
▼ ▲
INPUTS TEST
*=LAUNCH TEST
*
*
AREAS TO TEST
##
C.U. TAMP. TEST
*=LAUNCH TEST
C.U. BATT. TEST
*=LAUNCH TEST
SIRENS TEST
*=LAUNCH TEST
OUTPUTS TEST
*=LAUNCH TEST
▼ ▲
INPUTS TEST
*=LAUNCH TEST
Inputs test:
F S A
The open inputs test can be carried out on the whole system or just on some selected
areas
Control unit tamper test:
F
S A
Lets you check the control unit tamper status
Control unit battery test:
F S A
Lets you quickly check the control unit battery status
Sirens test:
F S A
The test allows you to manually control the control unit alarm relay output
Outputs test:
F S A
The test allows you to manually control the system's outputs
Inputs test:
F S A
The test allows you to control the status of the system's inputs
RS485 BUS
SYSTEM 02
*
RS485 BUS
▲
▼
▼ ▲
▼ ▲
* RS485 SPEED
9600
Setting the speed of the RS485 BUS:
A
Lets you set the speed of the RS485 BUS, at one of the following speeds: 115200,
38400, 9600 (default), 4800, 2400
CONFIGURING PXLAN/PXWEB
SYSTEM 02
*
SETTINGS
PXLAN/PXWEB
▲
▼
▼ ▲
▼ ▲
*
PXWEB/PXLAN DHCP
YES/NO
PXWEB KEYPAD
KEYPAD 02
192.168.001.100
IPADDR *=MODIF
255.255.255.000
NETMASK *=MODIF
192.168.001.001
GATEWAY *=MODIF
IP COMPUTER PORT
36821 *=MODIF
▼ ▲
Automatic addressing of networks cards:
A
Lets you enable/disable auto-addressing (DHCP)
Keypad duplication:(PXWEB)
A
Associates the virtual keypad with a physical keypad address
Setting IP address:
A
Lets you set the IP address of the network card
Setting SUBNET MASK:
A
Lets you set the SUBNET MASK
Setting GATEWAY:
A
Lets you set the GATEWAY
Setting IP connection port:
A
Lets you set the computer's IP connection port