Page
3
- Manual:
FA00458-EN
- vers.
1
- 04/2017 - © C
AME S.p.A. - The data and information shown in this manual ar
e t
o be consider
ed as subject t
o change at any time and without the need for any advance warning.
ENGLISH
Technical menu
ACCESSING TECHNICAL MENU
Depending on the parameter
TECH MENU ACCESS
(
CODES
->
INSTALLER'S TECHNICAL CODE
), access to the technical
menu may or may not be preceded by the User code
Simultaneous access from more than one keypad to the technical or user menu is not permitted
INDIRECT ACCESS
To access the Technical Menu hold down the
/ESC # key for 5 secs, enter the user code
123456
, hold down the
/ESC # key
again for 5 secs and enter the technical code
222222
Using keys
+
-
you can move from character to character, while with keys
you can change the text
5 sec
1
+
123456
2
+
222222
3
5 sec
+
4
222222
DIRECT ACCESS
With the system totally off, press key
/ESC # for 5 seconds and enter the technical code
222222
to go into the Technical Menu
Using keys
+
-
you can move from character to character, while with keys
you can change the text
5 sec
1
+
2
222222
PROGRAMMING MODES
For the security alarm control unit to be as user-friendly as possible (for inexperienced installers as well as the most demanding profession-
als), the system incorporates the "programming mode" concept This can provide a few or a lot of programming parameters depending on
the installer's skill or requirements
08:23 16/05/10
ENTER CODE
123456
WAITING
*=USER MENU
222222
PROGR. 01
MODE
PROGR. MODE
EASY
SOME PARAMETERS
WILL BE LOST!!
ARE YOU SURE?
A=YES #=ESC
*
*
+ -
▼
▲
Programming modes: (Default
EASY
)
F
S
A
EASY
only basic parameters for simple systems are available
STANDARD
the parameters for standard simple systems are available
ADVANCED
all configurable parameters are available
When making the move from "ADVANCED" to "EASY", the keypad suggests how to do so
Press “A” to confirm the automatic re-configuration of the parameters not managed at
default value
Press “#” to quit without editing the value, so it simply disappears
MENU HEADINGS BELONGING TO THE THREE MODES
This manual shows all the menu headings as if you were in ADVANCED mode
To find out which mode a menu heading can be displayed and therefore changed in, just look at which letters are given in the top right
corner of the description of each heading
F
S
A
Heading present in all three modes
S
A
Heading present in standard and advanced
A
Heading present only in advanced
Below are the main differences between the three types:
