Page
5
- Manual:
FA00458-EN
- vers.
1
- 04/2017 - © C
AME S.p.A. - The data and information shown in this manual ar
e t
o be consider
ed as subject t
o change at any time and without the need for any advance warning.
ENGLISH
SYSTEM
The system menu is used to define the components of the system (areas, keypads, readers, etc ), assign addresses to them, and carry out
a whole series of tests For programming move on to the following menu headings
MODIFY SYSTEM
SYSTEM 02
*
▼
▲
MODIFY
SYSTEM
▲
MANAGED AREAS
-##-
0..4
▼
*
KEYPADS
#---
0..4
INSERTERS
----
MITHO TOUCH
YES
0..4
▼
▲
▼
▲
+ -
Areas managed: (Default:
-##-
)
F
S
A
The areas to be managed in the system must be activated using the
+
-
keys The
system is considered totally armed if all the areas selected are on
Example: if you have only three areas (living area, bedtime area and perimeter), set
###-
Keypads: (Default:
#----
)
F
S
A
The keypads used must be activated using the
+
-
keys
Example: if you intend to use 4 keypads on the system set
####
Readers: (Default:
----
)
F
S
A
The readers used must be activated using the
+
-
keys
Example: if you intend to use 2 readers on the system set
##--
Mitho Touch: (Default:
YES
)
F
S
A
Use the
+
-
keys to enable/disable communication to BPT's MITHO building automation
system
Note Integrating PROXINET control units and BPT's MITHO building automation system is
only possible with control units using firmware version 1 0 16B4 or above
ADDRESSING REMOTE READERS
SYSTEM 02
*
ADDRESSING
INSERTERS
▲
▼
▼
▲
▼
▲
*
...SELF-LEARNING OF
INSERTERS...
ON INSERTER 01
APPROACH KEY
INSERTERS
SELF-LEARNED
Self-learning and automatic addressing of readers:
F
S
A
Allows the readers in the system to be learned Approach the key to the reader that you
intend to assign the address shown on the display
Readers already self-learned:
F
S
A
If the readers have already been self-learned this is confirmed on the display
