CAME PXC08, Programming Manual

Page: 7 / 36

Page
7
- Manual:
FA00458-EN
- vers.
1
- 04/2017 - © C
AME S.p.A. - The data and information shown in this manual ar
e t
o be consider
ed as subject t
o change at any time and without the need for any advance warning.
ENGLISH
SCENARIOS
SCENARIOS 03
*
▼ ▲
MODIFY SCEN. 01
GOING OUT
▲
AREA OPERATION 01
EXACT ON+OFF
▼
*
▼ ▲
▼ ▲
ASSOC. AREAS 01
#-
OUTPUT OPERAT. 01
DISABLED
ASSOC. OUTPUT 01
NO
+ -
+ -
+ -
DESCRIPTION 01
GOING OUT
*
Area operation: (Default:
EXACT ON+OFF
)
S A
Associated areas:
F S A
The parameter defines the operation that the scenario has to carry out in the areas, from
among those specified in
ASSOC. AREAS
DISABLED
The scenario does not alter the on/off status of the areas
Example: scenario disabled or scenario for which you only want to
manage the associated output defined in
ASSOC. OUTPUT
EXACT ON+OFF
The selected areas will be forced to arm and those deselected to
disarm in the exact configuration set
Example: this is the one used most and it is so that Users may set
whether areas are on or off by selecting scenarios independently
from the previous configuration
GOING OUT
###
; living area, bedrooms and perimeter ON;
GOING TO BED
#-#
; only living area and perimeter ON and
bedrooms OFF;
STAYING INDOORS
--#
; only the perimeter is ON
SEL.AREAS ON
Only the selected areas are armed, nothing changes with the
status of the areas not selected
Example: used for arming some specific areas: for example a
scenario that only arms the perimeter area (PERIMETER ON
--#
)
SEL.AREAS OFF
Only the selected areas are disarmed, nothing changes with the
status of the areas not selected
Example: used for disarming some specific areas: for example a
scenario that only disarms the perimeter area (PERIMETER OFF
--#
)
SWITCH SEL.AREAS
The selected areas change status: if armed, they are disarmed and
if disarmed, they are armed
Example: used for combining the act of arming or disarming some
areas in a single scenario; for example a scenario that only arms/
disarms the perimeter area (SWITCH PERIMETER
--#
)
Output operation and output association: (Default:
DISABLED
)
S A
If enabled, it lets an output be controlled directly by a scenario The output to be controlled
is selected in
ASSOC. OUTPUT
DISABLED
The scenario does not control any output
scenario disabled or scenario for which you only want to manage
areas
ON
The scenario activates the selected output
scenario that enables you to open a lock controlled by a timed
output Or a scenario that switches on a light controlled by a stable
output
OFF
The scenario deactivates the selected output
scenario that lets you switch off a light controlled by a stable
output
CHANGE
The scenario switches the status of the selected output (on
becomes off and off becomes on)
scenario that brings together the on and off commands of a light
controlled by a stable output
Scenario description:
F S A
Lets you edit the description of the scenario