ENGLISH
Page
30
- Manual:
FA00458-EN
- vers.
1
- 04/2017 - © C
AME S.p.A. - The data and information shown in this manual ar
e t
o be consider
ed as subject t
o change at any time and without the need for any advance warning.
+ -
DESCRIPTION
+ -
RST. SUPERVISION
DISABLED
Description of firm and assistance: (Default:
DISABLED
)
F
S
A
If activated, every time that a radio device is 'lost' the notification is repeated cyclically at the end
of the time set in the supervision window
Description of firm and assistance: (Default:
NO
)
F
S
A
Here you can enter the name of the installation company that will appear on the user menu under
the heading INFO
PROGRAMMER
The control unit has a simple weekly programmer The programme has 20 steps For each step it is possible to set the starting TIME and
the OPERATION to carry out Each programmed step will be carried out automatically by the control unit ONLY WHEN IT COINCIDES WITH
THE TIME SET (HOURS AND MINUTES) If for any reason a step programmed at a particular time is not carried out then, it will not be carried
out at all that day
It is not necessary to follow a chronological time sequence when setting the steps
IMPORTANT: it is imperative to pay careful attention when choosing the operations carried out automatically in the steps as, if not
programmed correctly, they can give rise to unwanted interventions of the control unit
PROGRAMMER 22
*
PROGRAMME A
*=MODIF. #=ESC
▲
PROG. AT STEP 01
*=NEW #=ESC
▼
*
▼
▲
PROG. AT STEP 01
HRS:00
+ -
▼
▲
▼
▲
*
PROG. AT STEP 01
MINUTES:00
+ -
PROG. AT STEP 01
OPERAT: NONE
+ -
PROG. AT STEP 01
ADDRESS:---
+ -
PROG. AT STEP 01
STATUS: OFF
+ -
▼
▲
Programme step: (Default:
DISABLED
)
A
To enable / modify a programme step press
*
and set the operation
To disable a programme step press
*
and set the operation to
NONE
*=NEW #=ESC
The programme step is disabled
HH:MM A,III,S,P
The programme step is enabled with the following
programming:
HH:MM:
hour and minutes;
A:
operation;
III:
address;
S:
status;
P:
postponement;
For the meaning of the values see the table below
Example: if there is a programming step that activates output 3 at 08:30 it will display:
08:30 2,003,1,0
Hour: 08; Minutes: 30; Operation: 2; Address: 3; Status: ON; Postponement: NO
Hour and minutes: (Default:
00:00
)
A
Lets you set the hour and minutes of the operation of the programme step
Operation, address and status: (Default:
NONE
)
A
The meaning of the operation, address and status changes depending upon how they
are set:
OPERATION
ADDRESS
STATUS
0 =
NONE
--
--
1 =
SECURITY ALARM
--
0 =
OFF
= total disarming
1 =
ON
= total arming
2 =
EXIT
Output index number
0 =
OFF
= output off
1 =
ON
= output on
3 =
AREA
Area index number
0 =
OFF
= disarming
1 =
ON
= arming
4=
B.CODES
Code group
0 =
OFF
= unblock codes
1 =
ON
= block codes
Example: if you want to activate output 3 at 8:30, you should set:
Operation: 2; Address: 3; Status: ON; Postponement: NO; Hour: 08; Minutes: 30
